60118 SQUARE D, 60118 Datasheet - Page 54

• Manufacturer Part Number: 60118
• Description: MINIATURE CIRCUIT BREAKER 120V 1A
• Manufacturer: SQUARE D
• Series: Multi 9r

Specifications of 60118

• Actuator Style: Toggle
• No. Of Poles: 1
• Current Rating: 1A
• Voltage Rating Vac: 240V
• Mounting Type: DIN Rail
• Rohs Compliant: Yes

54
Multi 9™ System Catalog
Section 5—Accessories
Padlock Attachment
Heavy-Duty Padlock
Attachment
07/2010
Operation Devices
Rotary Handles
A C60 or C120 protection device with 2-, 3-, or 4-poles can be equipped with a rotary handle with an
extension to allow operation of the circuit breaker from either the front or the side (lateral) from the
outside of a panel.
The handle requires that an operating subassembly be affixed to the supplementary protector or circuit
breaker. The operating subassembly requires one of two versions of the rotary handle:
•
•
•
Table 58:
Padlock Attachments
The Padlock Attachment clips onto the face of the C60N device to prevent the handle from being
operated. It cannot be installed or removed when padlocked. No tools are needed to install it.
The Padlock Attachment allows the IEC C60 circuit breaker to be locked in either the ON or the OFF
position (UL 489/CSA C22.2 No.5 Listed and UL 1077 Recognized devices can lock in the OFF
position only). The padlock attachment accepts a 0.315 in. (8 mm) diameter padlock, which is not
supplied.
The front plate or functional door can be opened with the circuit breaker locked in the OFF position.
NOTE: Locking the C60 or C120 in the ON position will not prevent the device from tripping under
overcurrent or ground fault conditions.
IEC Rated; not UL/CSA Recognized
Table 59:
Description
Padlock Attachment for C60 Protection Device
Heavy-Duty Padlock Attachment for C60N
Padlock Attachment for C120 Protection Device
Description
Operating Subassembly for C60 or
C120 Protection Device (Fixed to
Protection Device)
Drawout Extended Handle (Mounted on
Door or Hinged Panel)
Fixed Handle Front or Lateral (Mounted
on Fixed Panel)
— The first is a fixed handle for front or lateral mounting on a fixed panel.
— The second is a draw-out extended handle which may be mounted on a door or hinged panel.
Minimum depth for drawout is 6.8 in. (174 mm) including circuit breaker.
Minimum depth for lateral installation is 4.8 in. (122 mm) including circuit breaker.
IEC Rated; not UL/CSA Recognized
It mates with the operating subassembly as the door is closed.
IEC Rated Rotary Handles
Catalog Numbers for IEC Rated Padlock Attachments
US
Cat. No.
MG27046
MG27047
MG27048
IEC
Cat. No.
27046
27047
27048
Quantity
Bag of 4
Bag of 2
Bag of 2
Operating Subassembly with Lateral Rotary Handle
US Cat. No. IEC Cat. No.
MG26970
MG27145
M9PAF
© 2002–2010 Schneider Electric
26970
27145
—
All Rights Reserved