CRT1-ID08TA Omron, CRT1-ID08TA Datasheet - Page 598

• Manufacturer Part Number: CRT1-ID08TA
• Description: 8 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID08TA

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Temperature Input Unit Functions
Adjustment Device
Connection Diagram
Input Terminal
Connections
Checking the Wiring and
Making Adjustments
574
1,2,3...
Note
Connect the six-dial resistance box to the input terminals.
Connect them to the input terminals for the required input from input 0 to 3.
Adjusting the Upper and Lower Limit Values
1. Set the resistance value on the six-dial resistance box equivalent to the
2. If the correct resistance cannot be obtained, properly wire the digital mul-
3. Connect the CX-Integrator to the CompoNet network and go online.
4. Upload settings to the CX-Integrator.
5. Turn ON the power supplies of all Units, including the Temperature Input
6. Double-click the icon of the Temperature Input Unit to be set in the Network
7. Click the tab for the input that will be adjusted and click the Adjustment
NC
(1) When connecting the six-dial resistance box, use a cable with the same
(2) The personal computer (CX-Integrator) is connected through CompoNet
test value and properly wire the box to the input of the Temperature Input
Unit that is being adjusted.
timeter to the six-dial resistance box and measure the resistance.
Unit to be adjusted. Wait approximately 30 minutes for the Temperature In-
put Unit's internal temperature to stabilize.
Configuration Window or right-click the icon and select Parameters - Edit.
The Configuration Window will be displayed.
Button.
0A
gauge as the one that will be used for operation.
in the above diagram. If a CS1W-CRM21 or CJ1W-CRM21 Master Unit is
being used, it can be connected through the Master Unit using a periph-
eral bus connection to adjust the Temperature Input Unit.
0B
0B
NC
1A
1B
Six-dial resistance box
1B
CRT1-TS04P
NC
CompoNet
NC
Six-dial resistance box
Connect to the input terminals of
the input being adjusted.
Use to confirm that the six-dial resistance
box is providing an accurate resistance.
NC
Precision digital multimeter (DMM)
2A
2B
2B
NC
3A
3B
DMM
3B
CX-Integrator
Section 11-6