CRT1-ID08TA Omron, CRT1-ID08TA Datasheet - Page 91

• Manufacturer Part Number: CRT1-ID08TA
• Description: 8 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID08TA

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Preparing and Connecting DCN4-MR4 Multidrop Connectors
Componet Names
Preparing Flat Connectors
1,2,3...
1,2,3...
1,2,3...
■ Wiring Procedure
■ Attaching the Housing
■ Pressure-welding the Connector
1. Align the line colors of the cable with the cable labels, and place the cable
2. Close the cover until the hooks lock in place.
1. Confirm the colors again, and temporarily secure the housing to the cover.
Use the DWT-A01 Pliers to pressure-weld Connector.
1. As shown in the following figure, set the connector cover so that the center
2. Squeeze the Pliers firmly until you hear the connector lock into place.
Cover
on the Connector.
of it (indicated by the arrows) is in the center of the pressure-welding block
of the Pliers.
Black
Cable labels (Black,
blue/green, white, and red)
Housing
Cable Attached to
Connector
Section 3-3
67