SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 109

• Manufacturer Part Number: SX-550-1701
• Description: WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-1701

• Interface Type: UART
• Board Size: 59.6 mm x 49.1 mm x 14.3 mm
• Security: 802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
• Operating Voltage: 3.3 VDC
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SET DEFAULT
EXIT
SH FATal
CL FATal
INIT
SET PAssword
SET POWERON
SH POWERON
SET PROTect
CL PROTect
SAVE
SH TEst
UNPROTECT
SH CONSOLE
SPEED
Miscellaneous Commands
Part Number 40183-101
Command
Command
Set parameters to factory defaults
This command exits the current configuration console session.
Shows fatal error log, if fatal errors exist.
Clears the fatal error log
Instructs the server to execute a soft reset when the next exit command is
executed.
Sets the server access (read) password
Sets Power on delay
Displays Power on delay in seconds
Sets update password to the string given.
Sets update password to <null>.
Saves the current configuration to non-volatile memory.
Without this command, the configuration is not saved unless an EXIT
command is performed.
Sends the configuration data via ASCII to the serial port
If an update password has been defined (SET PROTECT), this command
enters the password to allow configuration items to be modified.
After entering this command, the server will prompt for the update
password. If entered properly, the user will then be able to execute SET
commands to modify the server configuration. This lasts only until the
console session is terminated with an EXIT command.
Displays the configured baud rate for the serial console port.
Sample output::
Software file
Load Host Name =
Console Speed: 19200 (0)
Table 43 Miscellaneous Commands
Silex SX-550 Developer's Guide
= xxxx.bin
Description
Description
Page 101