SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 15

• Manufacturer Part Number: SX-550-1701
• Description: WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-1701

• Interface Type: UART
• Board Size: 59.6 mm x 49.1 mm x 14.3 mm
• Security: 802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
• Operating Voltage: 3.3 VDC
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Installing the SX-550 Module
To install the SX-550 module in the SX-550-6900 Evaluation Daughtercard:
1. Using the 40-pin OEM header, plug the SX-550 Module in the SX-550-6900 Evaluation Daughtercard
2. If you are installing a SX-550 WLAN model, plug the main antenna cable into the Primary Antenna
Part Number 40183-101
and secure with screws, nuts and spacers. Important: The spacers MUST be installed to avoid
potential damage to the boards.
Connector on the card (see picture below). If needed, plug the auxiliary antenna cable into the
Auxiliary Antenna Connector.
Figure 3 SX-550 Module Inserted in Daughtercard (SX-550-1701 WLAN version shown)
IMPORTANT: If you are only using a single antenna, you MUST connect this antenna to the Primary Antenna
Connector.
Figure 4 Antenna Connectors
Silex SX-550 Developer's Guide
Page 7