SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 60

• Manufacturer Part Number: SX-550-1701
• Description: WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-1701

• Interface Type: UART
• Board Size: 59.6 mm x 49.1 mm x 14.3 mm
• Security: 802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
• Operating Voltage: 3.3 VDC
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Econn
Ecport
Eclport
Ectmmsec
Ecudp
Restoring Factory Default Settings
The factory default settings can restored at any time. If you are using the SX-550 Evaluation
Daughtercard, hold down the test button for more than five seconds. If you are not using the evaluation
board, short GPIO7 on the OEM header to ground (4.7 K-ohm pull-up resistor connected to +3.3VDC) for
more than five seconds.
Modifying TCP/IP Settings
You can modify the TCP/IP settings using ExtendView, the web browser interface or the SX-550 module’s
internal configuration console.
To modify TCP/IP settings:
Part Number 40183-101
Using ExtendView, click the TCP/IP tab. The TCP/IP window displays.
Parameter
ECable connection attempt time
ECable destination TCP port number
ECable destination local IP port
number (required for E-Cable UDP
mode only)
Cable connection time resolution
ECable UDP mode
Description
Figure 8 TCP/IP Window
Silex SX-550 Developer's Guide
1-255 seconds
Set by user
Set by user
Enable, Disable
Enable, Disable
Settings
30 seconds
N/A
N/A
Disable
Disable
Default Setting
Page 52