SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 35

• Manufacturer Part Number: SX-550-1701
• Description: WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-1701

• Interface Type: UART
• Board Size: 59.6 mm x 49.1 mm x 14.3 mm
• Security: 802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
• Operating Voltage: 3.3 VDC
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Using a Web Browser to Configure the SX-550
After you have entered an IP address into the SX-550, you can use any standard web browser to access
the internal web pages for configuring the SX-550. Simply specify the IP address of the SX-550 in your
browser and then follow the steps below:
Part Number 40183-101
You may skip this section if you have completely configured the SX-550 using ExtendView. However, if you have advanced
configuration requirements, such as 802.1X EAP configuration, then you may need to use the internal web pages as
described in this section because ExtendView does not support these capabilities.
IMPORTANT: You must click the Submit button when you have finished configuring an internal web page. If you do not do
this, your changes will not be saved.
Silex SX-550 Developer's Guide
1. When you have connected to the SX-550, you
2. Enter the password access and press
3. You will return to the Server Info page, but
will get the Server Info page. Click Login on
the left side of the screen.
Submit.
new options will be listed on the left side of
the screen. Click on TCP/IP.
Page 27