EVAL-AD9880-ABZ Analog Devices Inc, EVAL-AD9880-ABZ Datasheet - Page 11

• Manufacturer Part Number: EVAL-AD9880-ABZ
• Description: Video Input Module Kit AD9880
• Manufacturer: Analog Devices Inc

Specifications of EVAL-AD9880-ABZ

• Main Purpose: Video, Video Processing
• Embedded: No
• Utilized Ic / Part: AD9880
• Primary Attributes: HDMI Receiver & Analog Interface
• Secondary Attributes: Triple 8-bit 150MSPS ADC's
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Pin
POWER SUPPLY
1
The supplies should be sequenced such that VD and VDD are never less than 300 mV below DVDD. At no time should DVDD be more than 300 mV greater than VD or
VDD.
V
V
PV
DV
GND
DD
D
DD
(3.3 V)
DD
(1.8 V – 3.3 V)
(1.8 V)
(1.8 V)
1
Description
Analog Power Supply.
These pins supply power to the ADCs and terminators. They should be as quiet and filtered as possible.
Digital Output Power Supply.
A large number of output pins (up to 27) switching at high speed (up to 150 MHz) generates many power supply
transients (noise). These supply pins are identified separately from the V
output noise transferred into the sensitive analog circuitry. If the AD9880 is interfacing with lower voltage logic, V
may be connected to a lower supply voltage (as low as 1.8 V) for compatibility.
Clock Generator Power Supply.
The most sensitive portion of the AD9880 is the clock generation circuitry. These pins provide power to the clock PLL
and help the user design for optimal performance. The designer should provide quiet, noise-free power to these pins.
Digital Input Power Supply.
This supplies power to the digital logic.
Ground.
The ground return for all circuitry on chip. It is recommended that the AD9880 be assembled on a single solid ground
plane, with careful attention to ground current paths.
Rev. 0 | Page 11 of 64
D
pins so special care can be taken to minimize
AD9880
DD