MC68MH360AI33L Freescale Semiconductor, MC68MH360AI33L Datasheet - Page 539

• Manufacturer Part Number: MC68MH360AI33L
• Description: IC MPU QUICC 33MHZ 240-FQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68MH360AI33L

• Processor Type: M683xx 32-Bit
• Speed: 33MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 240-FQFP
• Family Name: M68xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 33MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: FQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

BR—BCS Reset
TD—Transmit DLE
TR—Transparent Mode
B—BCS Enable
The following status bits are written by the CP after it has finished transmitting the associ-
ated data buffer.
UN—Underrun
CT—CTS Lost
Data Length
The BISYNC controller encountered a transmitter underrun condition while transmitting
the associated data buffer.
CTS was lost during message transmission.
The data length is the number of octets that the CP should transmit from this BD’s data
buffer. It is never modified by the CP. The data length should be greater than zero.
0 = The transmitter BCS accumulation is not reset.
1 = The transmitter BCS accumulation is reset (used for STX or SOH) before sending
0 = No automatic DLE transmission is to occur before the data buffer.
1 = The transmitter will transmit a DLE character before sending the data buffer, which
0 = The transmitter will enter (remain in) the normal mode after sending the data buffer.
1 = The transmitter enters or remains in transparent mode after sending the data buff-
0 = Buffer consists of characters to be excluded from the BCS accumulation.
1 = Buffer consists of characters to be included in the BCS accumulation.
However, the R-bit will be cleared if an error occurs during transmission, regard-
less of the CM bit.
the data buffer.
saves writing the first DLE to a separate data buffer when working in transparent
mode. See the TR bit for information on control characters.
In this mode, the transmitter will automatically insert SYNCs in an underrun condi-
tion.
er. In this mode, the transmitter automatically inserts DLE-SYNC pairs in the un-
derrun condition. Underrun occurs when the BISYNC controller finishes a buffer
with the L-bit set to zero and the next BD is not available. The transmitter also
checks all characters before sending them; if a DLE is detected, another DLE is
automatically sent. The user must insert a DLE or program the BISYNC controller
to insert it (using TD) before each control character required. The transmitter will
calculate the CRC16 BCS even if the BCS bit in the BISYNC mode register is pro-
grammed to LRC. The PTCRC should be initialized to CRC16 before setting this
bit.
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68360 USER’S MANUAL
Go to: www.freescale.com
Serial Communication Controllers (SCCs)