MC68360CRC25L Freescale Semiconductor, MC68360CRC25L Datasheet - Page 227

no-image

MC68360CRC25L

Manufacturer Part Number
MC68360CRC25L
Description
IC MPU QUICC 25MHZ 241-PGA
Manufacturer
Freescale Semiconductor

Specifications of MC68360CRC25L

Processor Type
M683xx 32-Bit
Speed
25MHz
Voltage
5V
Mounting Type
Surface Mount
Package / Case
241-PGA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68360CRC25L
Manufacturer:
NICHICON
Quantity:
5 005
Freescale Semiconductor, Inc.
CPU32+
5.7.1.3.3 Microbus Controller. The microbus controller performs bus cycles issued by the
microsequencer. Operand accesses always have priority over instruction prefetches. Word
and byte operands are accessed in a single CPU-initiated bus cycle, although the external
bus interface may be required to initiate a second cycle when a word operand is sent to a
byte-sized external port. If long operands are accessed from a 16-bit port, they are accessed
in two bus cycles, most significant word first.
The instruction pipeline is capable of recognizing instructions that cause a change of flow.
It informs the bus controller when a change of flow is imminent, and the bus controller
refrains from starting prefetches that would be discarded due to the change of flow.
5.7.1.4 INSTRUCTION EXECUTION OVERLAP. Overlap is the time, measured in clock
cycles, that an instruction executes concurrently with the previous instruction. As shown in
Figure 5-31, portions of instructions A and B execute simultaneously, reducing total execu-
tion time. Because portions of instructions B and C also overlap, overall execution time for
all three instructions is also reduced.
Each instruction contributes to the total overlap time. The portion of execution time at the
end of instruction A that can overlap the beginning of instruction B is called the tail of instruc-
tion A. The portion of execution time at the beginning of instruction B that can overlap the
end of instruction A is called the head of instruction B. The total overlap time between in-
structions A and B is the smaller tail of A and the head of B.
INSTRUCTION A
INSTRUCTION B
INSTRUCTION C
OVERLAP
OVERLAP
Figure 5-31. Simultaneous Instruction Execution
The execution time attributed to instructions A, B, and C after considering the overlap is illus-
trated in Figure 5-32. The overlap time is attributed to the execution time of the completing
instruction. The following equation shows the method for calculating the overlap time:
Overlap = min (Tail
, Head
)
N
N+1
MC68360 USER’S MANUAL
For More Information On This Product,
Go to: www.freescale.com

Related parts for MC68360CRC25L