MC68360CRC25L Freescale Semiconductor, MC68360CRC25L Datasheet - Page 766

no-image

MC68360CRC25L

Manufacturer Part Number
MC68360CRC25L
Description
IC MPU QUICC 25MHZ 241-PGA
Manufacturer
Freescale Semiconductor

Specifications of MC68360CRC25L

Processor Type
M683xx 32-Bit
Speed
25MHz
Voltage
5V
Mounting Type
Surface Mount
Package / Case
241-PGA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68360CRC25L
Manufacturer:
NICHICON
Quantity:
5 005
Freescale Semiconductor, Inc.
Applications
future 16M
36 DRAM SIMMs. In fact, this multiplexing scheme allows SIMMs of many dif-
ferent sizes to be used on the board without hardware modification.
This particular SIMM also includes parity support, supported with the PRTY3–PRTY0 sig-
nals.
This design also uses the RAS1 double-drive capability, whereby the RAS1DD signal is out-
put by the QUICC to increase the effective drive capability of the RAS1 signal. The RAS1
line should be programmed to respond to a 4-Mbyte address space.
After power-on reset, the software must wait the required time before accessing the DRAM.
The required eight read cycles must then be performed either in software or by waiting for
the refresh controller to perform these accesses.
9.4.2.9 DRAM DEVICES. Figure 9-16 shows the interface to a standalone DRAM device. In
this case, the MCM54260 256K
16 DRAM device is chosen. This allows a full 32-bit-wide
DRAM solution using only two DRAM devices, with byte writes still supported using the
upper and lower CASx pins. Both the MC68EC040 and the QUICC can access the DRAM
array. The RAS1 line should be programmed to respond to a 1-Mbyte address space.
The address multiplexing scheme is the same as that for the DRAM SIMM. No parity support
is provided in this case. The RAS1DD signal is not used in this case since only two devices
are supported.
After power-on reset, the software must wait the required time before accessing the DRAM
(approximately 100 s). The required eight read cycles must then be performed either in
software or by waiting for the QUICC refresh controller to perform these accesses.
9-46
MC68360 USER’S MANUAL
For More Information On This Product,
Go to: www.freescale.com

Related parts for MC68360CRC25L