FSD176MRT Fairchild Semiconductor, FSD176MRT Datasheet - Page 3

• Manufacturer Part Number: FSD176MRT
• Description: The FSD176MRT is an integrated Pulse Width Modulation (PWM) controller and SenseFET specifically designed for offline Switch-Mode Power Supplies (SMPS) with minimal external components
• Manufacturer: Fairchild Semiconductor

© 2011 Fairchild Semiconductor Corporation
FSD176MRT • Rev. 1.0.0
Pin Configuration
Pin Definitions
Pin #
1
2
3
4
5
6
Name
Drain
GND
V
V
NC
FB
STR
CC
SenseFET Drain. High-voltage power SenseFET drain connection.
Ground. This pin is the control ground and the SenseFET source.
Power Supply. This pin is the positive supply input, which provides the internal operating
current for both startup and steady-state operation.
Feedback. This pin is internally connected to the inverting input of the PWM comparator.
The collector of an opto-coupler is typically tied to this pin. For stable operation, a capacitor
should be placed between this pin and GND. If the voltage of this pin reaches 7V, the overload
protection triggers, which shuts down the FPS.
No Connection
Startup. This pin is connected directly, or through a resistor, to the high-voltage DC link.
At startup, the internal high-voltage current source supplies internal bias and charges the
external capacitor connected to the V
source (I
CH
) is disabled.
Figure 3.
Pin Configuration (Top View)
3
CC
Description
pin. Once V
CC
reaches 12V, the internal current
www.fairchildsemi.com