UPD753012GC NEC, UPD753012GC Datasheet - Page 75

• Manufacturer Part Number: UPD753012GC
• Description: 4-BIT SINGLE-CHIP MICROCONTROLLER
• Manufacturer: NEC

PROM write tools
Note Ver.5.00 and later have the task swap function, but it cannot be used for this software.
Remark The operation of the PG-1500 controller is guaranteed only on the above host machines and OSs.
Hardware
Software
PG-1500
PA-75P316BGC
PA-75P316BGK
PG-1500 controller
PG-1500 is a PROM programmer which enables you to program single chip microcomputers
containing PROM by stand-alone or host machine operation by connecting an attached
board and optional programmer adapter to PG-1500.
It also enables you to program typical PROM devices of 256K bits to 4M bits.
PROM programmer adapter for PD75P3018GC. Connect the programmer adapter to PG-
1500 for use.
PROM programmer adapter for PD75P3018GK. Connect the programmer adapter to PG-
1500 for use.
PG-1500 and a host machine are connected by serial and parallel interfaces and PG-1500
is controlled on the host machine.
PC-9800 series
IBM PC/AT and
compatible machines
Host machine
Refer to
OS for IBM PC
Ver. 3.30 to
Ver. 6.2
MS-DOS
OS
Note
PD753012, 753016, 753017
3.5-inch 2HD
5-inch 2HD
3.5-inch 2HC
5-inch 2HC
Distribution media
S5A13PG1500
S5A10PG1500
S7B13PG1500
S7B10PG1500
(product name)
Part number
75