SAK-C505L Infineon Technologies AG, SAK-C505L Datasheet - Page 22

no-image

SAK-C505L

Manufacturer Part Number
SAK-C505L
Description
8-bit CMOS Microcontroller
Manufacturer
Infineon Technologies AG
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SAK-C505L-4EM
Manufacturer:
SIEMENS
Quantity:
5 510
Part Number:
SAK-C505L-4EM
Manufacturer:
NEC
Quantity:
5 510
Special Function Registers
The registers, except the program counter and the four general purpose register banks, reside in
the special function register area which consists of two portions: the standard special function
register area and the mapped special function register area. Some of the C505L’s SFRs (PCON1,
VR0, VR1 and VR2) are located in the mapped SFR area. For accessing the mapped SFR area, bit
RMAP in SFR SYSCON must be set. All other SFRs are located in the standard SFR area which is
accessed when RMAP is cleared (“0”).
The registers and data locations of the LCD Controller (LCD-SFRs) and the RTC (RTC-SFRs) are
located in the external data memory area at addresses F3DD
respectively.
Special Function Register SYSCON (Address B1
Bit
RMAP
As long as bit RMAP is set, mapped SFR area can be accessed. This bit is not cleared automatically
by hardware. Thus, when non-mapped/mapped registers are to be accessed, the bit RMAP must
be cleared/set respectively by software.
All SFRs with addresses where address bits 0-2 are 0 (e.g. 80
bit-addressable.
The 51 SFRs in the standard and mapped SFR area include pointers and registers that provide an
interface between the CPU and the other on-chip peripherals. The SFRs of the C505L are listed in
Table 2 and Table 3. In Table 2 they are organized in groups which refer to the functional blocks of
the C505L. The LCD and RTC-SFRs are also included in Table 2. Table 3 illustrates the contents
of the SFRs in numeric order of their addresses. Table 4 lists the LCD and the RTC-SFRs in
numeric order of their addresses.
Data Sheet
Bit No.
B1
H
MSB
7
_
The shaded bits are not described in this section.
Function
SFR map bit
RMAP = 0: Access to the non-mapped (standard) SFR area is enabled.
RMAP = 1: Access to the mapped SFR area is enabled.
Reserved bits for future use. Read by CPU returns undefined values.
6
_
EALE RMAP
5
4
20
3
H
_
)
2
_
H
, 88
H
XMAP1 XMAP0
to F3EF
H
1
, 90
Reset Value: XX100X01
H
, 98
H
LSB
and F3F0
0
H
,
, F8
SYSCON
H
H
, FF
to F3FF
C505L
H
06.99
) are
H
B

Related parts for SAK-C505L