S9S12G64F0CLFR Freescale Semiconductor, S9S12G64F0CLFR Datasheet - Page 923

• Manufacturer Part Number: S9S12G64F0CLFR
• Description: 16-bit Microcontrollers - MCU S12 Core,64K FLASH AU
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G64F0CLFR

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 1 MHz
• Program Memory Size: 64 KB
• Data Ram Size: 8 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit, 12 bit
• A/d Channels Available: 12
• Interface Type: SPI
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 40
• Number Of Timers: 8
• Program Memory Type: Flash
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 3.13 V

26.4.6.15 Program EEPROM Command
The Program EEPROM operation programs one to four previously erased words in the EEPROM block.
The Program EEPROM operation will confirm that the targeted location(s) were successfully programmed
upon completion.
Upon clearing CCIF to launch the Program EEPROM command, the user-supplied words will be
transferred to the Memory Controller and be programmed if the area is unprotected. The CCOBIX index
value at Program EEPROM command launch determines how many words will be programmed in the
EEPROM block. The CCIF flag is set when the operation has completed.
Freescale Semiconductor
Register
FSTAT
A Flash word must be in the erased state before being programmed.
Cumulative programming of bits within a Flash word is not allowed.
Table 26-61. Erase Verify EEPROM Section Command Error Handling
Table 26-62. Program EEPROM Command FCCOB Requirements
CCOBIX[2:0]
MGSTAT1
MGSTAT0
ACCERR
Error Bit
FPVIOL
000
001
010
011
100
101
MC9S12G Family Reference Manual, Rev.1.23
Set if CCOBIX[2:0] != 010 at command launch
Set if command not available in current mode (see
Set if an invalid global address [17:0] is supplied
Set if a misaligned word address is supplied (global address [0] != 0)
Set if the requested section breaches the end of the EEPROM block
None
Set if any errors have been encountered during the read or if blank check failed.
Set if any non-correctable errors have been encountered during the read or if
blank check failed.
Global address [15:0] of word to be programmed
0x11
Word 1 program value, if desired
Word 2 program value, if desired
Word 3 program value, if desired
CAUTION
Word 0 program value
FCCOB Parameters
Error Condition
identify the EEPROM block
Global address [17:16] to
48 KByte Flash Module (S12FTMRG48K1V1)
Table
26-27)
925