TC58FVM6T5BTG65 Toshiba, TC58FVM6T5BTG65 Datasheet - Page 11

• Manufacturer Part Number: TC58FVM6T5BTG65
• Description: IC FLASH 64MBIT 65NS 48TSOP
• Manufacturer: Toshiba

Specifications of TC58FVM6T5BTG65

• Format - Memory: FLASH
• Memory Type: FLASH - Nor
• Memory Size: 64M (8Mx8, 4Mx16)
• Speed: 65ns
• Interface: Parallel
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Write is executed by inputting the address and data into the Command Register. The command is written by inputting a pulse
to WE with CE = V
edge of either WE or CE . DQ0~DQ7 are valid for data input and DQ8~DQ15 are ignored.
Read Mode. If an undefined command is input, the Command Register will be reset and the device will enter Read Mode.
10.7. Software Reset: Read/Reset Command
10.8. Hardware Reset
abandons the operation which is in progress and enters the Read Mode after t
during data overwriting, such as a Write or Erase operation, data at the address or block being written to at the time of the
reset will become undefined.
High-Impedance when RESET = V
are allowed.
10.9. Comparison between Software Reset and Hardware Reset
WE = V
10.6. Command Write
or CFI Mode to Read Mode, releases the lock state if automatic operation has ended abnormally, and clears the Command
Register.
The TC58FVM6(T/B)5B uses the standard JEDEC control commands for a single-power supply E
To abort input of the command sequence uses the Reset command. The device will reset the Command Register and enter
A hardware reset initializes the device and sets it to Read Mode. When a pulse is input to RESET for t
After a hardware reset, the device enters Read Mode if RESET = V
Initiate the software reset by inputting a Read/Reset command. The software reset returns the device from ID Read Mode
Releases ID Read Mode or CFI Mode.
Clears the Command Register.
Releases the lock state if automatic operation has ended
abnormally.
Stops any automatic operation which is in progress.
Stops any operation other than the above and returns the
device to Read Mode.
IL
( CE control). The address is latched on the falling edge of either WE or CE . The data is latched on the rising
IL
and OE = V
ACTION
IL
IH
. After the device has entered Read Mode, Read operations and input of any command
( WE control). The command can also be written by inputting a pulse to CE with
SOFTWARE RESET
IH
False
False
True
True
True
or Standby Mode if RESET = V
TC58FVM6(T/B)5B(TG/XG)65
READY
. Note that if a hardware reset is applied
HARDWARE RESET
2
PROM. A Command of
True
True
True
True
True
2006-05-10 11/80
RP
IL
. The DQ pins are
, the device