PIC18F1230-I/SO Microchip Technology, PIC18F1230-I/SO Datasheet - Page 99

• Manufacturer Part Number: PIC18F1230-I/SO
• Description: IC PIC MCU FLASH 2KX16 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F1230-I/SO

• Core Size: 8-Bit
• Program Memory Size: 4KB (2K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (7.5mm Width)
• Controller Family/series: PIC18
• No. Of I/o's: 16
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 40MHz
• No. Of Timers: 2
• Package: 18SOIC W
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 16
• Interface Type: USART
• On-chip Adc: 4-chx10-bit
• Number Of Timers: 2
• Processor Series: PIC18F
• Core: PIC
• Data Ram Size: 256 B
• Maximum Clock Frequency: 40 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136
• Minimum Operating Temperature: - 40 C
• Height: 2.31 mm
• Length: 11.53 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.2 V
• Width: 7.49 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 11-5:
REGISTER 11-6:
 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-5
bit 4
bit 3
bit 2
bit 1-0
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3-0
OSCFIF
R/W-0
U-0
—
OSCFIF: Oscillator Fail Interrupt Flag bit
1 = Device oscillator failed, clock input has changed to INTOSC (must be cleared in software)
0 = Device clock operating
Unimplemented: Read as ‘0’
EEIF: Data EEPROM/Flash Write Operation Interrupt Flag bit
1 = The write operation is complete (must be cleared in software)
0 = The write operation is not complete or has not been started
Unimplemented: Read as ‘0’
LVDIF: Low-Voltage Detect Interrupt Flag bit
1 = A low-voltage condition occurred
0 = A low-voltage condition has not occurred
Unimplemented: Read as ‘0’
Unimplemented: Read as ‘0’
PTIF: PWM Time Base Interrupt bit
1 = PWM time base matched the value in PTPER register. Interrupt is issued according to the
0 = PWM time base has not matched the value in PTPER register
Unimplemented: Read as ‘0’
postscaler settings. PTIF must be cleared in software.
U-0
U-0
—
—
PIR2: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 2
PIR3: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 3
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
U-0
U-0
—
—
R/W-0
R/W-0
EEIF
PTIF
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
‘0’ = Bit is cleared
U-0
U-0
—
—
PIC18F1230/1330
R/W-0
LVDIF
U-0
—
x = Bit is unknown
x = Bit is unknown
U-0
U-0
—
—
DS39758D-page 99
U-0
U-0
—
—
bit 0
bit 0