PIC16F74-I/P Microchip Technology, PIC16F74-I/P Datasheet - Page 489

• Manufacturer Part Number: PIC16F74-I/P
• Description: IC MCU FLASH 4KX14 A/D 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F74-I/P

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 33
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16F
• No. Of I/o's: 33
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Package: 40PDIP
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 33
• Interface Type: I2C/SPI/USART
• On-chip Adc: 8-chx8-bit
• Number Of Timers: 3
• Processor Series: PIC16F
• Core: PIC
• Data Ram Size: 192 B
• Maximum Clock Frequency: 20 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Section 26. Watchdog Timer and Sleep Mode
Example 26-1:
Example 26-2:
1997 Microchip Technology Inc.
Changing Prescaler (Timer0 WDT)
Changing Prescaler (WDT Timer0)
To change prescaler from the WDT to the Timer0 module use the sequence shown in
Example
BSF
MOVLW
MOVWF
BCF
CLRF
BSF
MOVLW
MOVWF
CLRWDT
MOVLW
MOVWF
BCF
CLRWDT
BSF
MOVLW
MOVWF
BCF
26-2.
STATUS, RP0
B’xx0x0xxx’
OPTION_REG
STATUS, RP0
TMR0
STATUS, RP0
B’xxxx1xxx’
OPTION_REG
b'xxxx1xxx'
OPTION_REG
STATUS, RP0
STATUS, RP0
b'xxxx0xxx'
OPTION_REG
STATUS, RP0
; Bank1
; Select clock source and postscale value
;
; Bank0
; Clear TMR0 & Prescaler
; Bank1
; Select WDT, do not change prescale value
;
; Clears WDT
; Select new prescale value and WDT
;
; Bank0
; Clear WDT and postscaler
; Bank1
; Select TMR0, new prescale
; value and clock source
; Bank0
other than 1:1
DS31026A-page 26-5
26