MC908SR12MFAE Freescale Semiconductor, MC908SR12MFAE Datasheet - Page 209

• Manufacturer Part Number: MC908SR12MFAE
• Description: IC MCU 12K FLASH 8MHZ 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908SR12MFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SCI
• Peripherals: LVD, POR, PWM, Temp Sensor
• Number Of I /o: 31
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

12.7 Low-Power Modes
12.7.1 Wait Mode
12.7.2 Stop Mode
MC68HC908SR12•MC68HC08SR12 — Rev. 5.0
Freescale Semiconductor
The WAIT and STOP instructions put the MCU in low power-
consumption standby modes.
The timebase module remains active after execution of the WAIT
instruction. In wait mode, the timebase register is not accessible by the
CPU.
If the timebase functions are not required during wait mode, reduce the
power consumption by stopping the timebase before enabling the WAIT
instruction.
The timebase module may remain active after execution of the STOP
instruction if the oscillator has been enabled to operate during stop mode
through the stop mode oscillator enable bit (STOP_ICLKEN,
STOP_RCLKEN, or STOP_XCLKEN) for the selected oscillator in the
CONFIG2 register. The timebase module can be used in this mode to
generate a periodic walk-up from stop mode.
If the oscillator has not been enabled to operate in stop mode, the
timebase module will not be active during STOP mode. In stop mode the
timebase register is not accessible by the CPU.
If the timebase functions are not required during stop mode, reduce the
power consumption by stopping the timebase before enabling the STOP
instruction.
Timebase Module (TBM)
Timebase Module (TBM)
Low-Power Modes
Data Sheet
209