MC908SR12MFAE Freescale Semiconductor, MC908SR12MFAE Datasheet - Page 220

IC MCU 12K FLASH 8MHZ 48-LQFP

MC908SR12MFAE

Manufacturer Part Number
MC908SR12MFAE
Description
IC MCU 12K FLASH 8MHZ 48-LQFP
Manufacturer
Freescale Semiconductor
Series
HC08r
Datasheet

Specifications of MC908SR12MFAE

Core Processor
HC08
Core Size
8-Bit
Speed
8MHz
Connectivity
I²C, SCI
Peripherals
LVD, POR, PWM, Temp Sensor
Number Of I /o
31
Program Memory Size
12KB (12K x 8)
Program Memory Type
FLASH
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 14x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 125°C
Package / Case
48-LQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC908SR12MFAE
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Part Number:
MC908SR12MFAER
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Pulse Width Modulator (PWM)
13.10.4 PWM Phase Control Register
Data Sheet
220
Address:
The value of each PWM data register is continuously compared with the
content of a PWM counter to determine the state of each PWM channel
output pin.
A value of $00 loaded into these register results in a continuously low
output on the corresponding PWM output pin. A value of $80 results in a
50% duty cycle output and so on. The maximum value, $FF correspond
to an output which is a "1" for 255/256 of the PWM cycle.
A new value written to the PWM data register will not be effective until
the end of the current PWM period. Upon the end of the current PWM
period, the contain of the PWM data register is loaded into the PWM data
buffer, the value of the PWM data buffer controls the PWM output.
The PWM phase control register (PWMPCR) enables the automatic
phase control and sets the phase values between the PWM channels.
PHEN — PWM Automatic Phase Control Enable Bit
PHD6–PHD0 — PWM Phase Value Bits
Reset:
Read:
Write:
Setting this bit to 1 will enable the automatic phase control function.
Reset clears this bit.
This 7-bit phase value is used to determined the start-up time of the
different PWM counters when PHEN bit is set. Reset clears these bits.
1 = Automatic phase control enabled
0 = Automatic phase control disabled
Figure 13-10. PWM Phase Control Register (PWMPCR)
$0056
PHEN
0
Pulse Width Modulator (PWM)
PHD6
0
PHD5
0
MC68HC908SR12•MC68HC08SR12 — Rev. 5.0
PHD4
0
PHD3
0
PHD2
Freescale Semiconductor
0
PHD1
0
PHD0
0

Related parts for MC908SR12MFAE