MC9S12XEP100CAG Freescale Semiconductor, MC9S12XEP100CAG Datasheet - Page 728

• Manufacturer Part Number: MC9S12XEP100CAG
• Description: IC MCU 16BIT 1M FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XEP100CAG

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 119
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: S12XE
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 64 KB
• Interface Type: CAN/SCI/SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 119
• Number Of Timers: 25
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 24-ch x 12-bit
• Cpu Family: HCS12X
• Device Core Size: 16b
• Frequency (max): 50MHz
• Total Internal Ram Size: 64KB
• # I/os (max): 119
• Number Of Timers - General Purpose: 25
• Operating Supply Voltage (typ): 1.8/2.8/5V
• Operating Supply Voltage (max): 1.98/2.9/5.5V
• Operating Supply Voltage (min): 1.72/2.7/3.13V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Package: 144LQFP
• Family Name: HCS12X
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|2.8|5 V
• For Use With: EVB9S12XEP100 - BOARD EVAL FOR MC9S12XEP100DEMO9S12XEP100 - BOARD DEMO FOR MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 20 Serial Communication Interface (S12SCIV5)
20.2
The SCI module has a total of two external pins.
20.2.1
The TXD pin transmits SCI (standard or infrared) data. It will idle high in either mode and is high
impedance anytime the transmitter is disabled.
20.2.2
The RXD pin receives SCI (standard or infrared) data. An idle line is detected as a line high. This input is
ignored when the receiver is disabled and should be terminated to a known voltage.
20.3
This section provides a detailed description of all the SCI registers.
20.3.1
The memory map for the SCI module is given below in
the address offset. The total address for each register is the sum of the base address for the SCI module and
the address offset for each register.
728
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
External Signal Description
Memory Map and Register Definition
TXD — Transmit Pin
RXD — Receive Pin
Module Memory Map and Register Definition
MC9S12XE-Family Reference Manual , Rev. 1.23
Figure
20-2. The address listed for each register is
Freescale Semiconductor