MC9S12XEP100CAG Freescale Semiconductor, MC9S12XEP100CAG Datasheet - Page 751

• Manufacturer Part Number: MC9S12XEP100CAG
• Description: IC MCU 16BIT 1M FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XEP100CAG

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 119
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: S12XE
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 64 KB
• Interface Type: CAN/SCI/SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 119
• Number Of Timers: 25
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 24-ch x 12-bit
• Cpu Family: HCS12X
• Device Core Size: 16b
• Frequency (max): 50MHz
• Total Internal Ram Size: 64KB
• # I/os (max): 119
• Number Of Timers - General Purpose: 25
• Operating Supply Voltage (typ): 1.8/2.8/5V
• Operating Supply Voltage (max): 1.98/2.9/5.5V
• Operating Supply Voltage (min): 1.72/2.7/3.13V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Package: 144LQFP
• Family Name: HCS12X
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|2.8|5 V
• For Use With: EVB9S12XEP100 - BOARD EVAL FOR MC9S12XEP100DEMO9S12XEP100 - BOARD DEMO FOR MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

indicating that the received byte can be read. If the receive interrupt enable bit, RIE, in SCI control
register 2 (SCICR2) is also set, the RDRF flag generates an RDRF interrupt request.
20.4.6.3
The RT clock rate. The RT clock is an internal signal with a frequency 16 times the baud rate. To adjust
for baud rate mismatch, the RT clock (see
To locate the start bit, data recovery logic does an asynchronous search for a logic 0 preceded by three logic
1s.When the falling edge of a possible start bit occurs, the RT clock begins to count to 16.
To verify the start bit and to detect noise, data recovery logic takes samples at RT3, RT5, and RT7.
Figure 20-17
If start bit verification is not successful, the RT clock is reset and a new search for a start bit begins.
Freescale Semiconductor
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
RT CLock Count
•
•
Reset RT Clock
After every start bit
After the receiver detects a data bit change from logic 1 to logic 0 (after the majority of data bit
samples at RT8, RT9, and RT10 returns a valid logic 1 and the majority of the next RT8, RT9, and
RT10 samples returns a valid logic 0)
RT Clock
Samples
RXD
Data Sampling
summarizes the results of the start bit verification samples.
1
RT3, RT5, and RT7 Samples
1
1
1
000
001
010
011
100
101
110
111
1
MC9S12XE-Family Reference Manual Rev. 1.23
1
Figure 20-21. Receiver Data Sampling
Qualification
Start Bit
Table 20-17. Start Bit Verification
1
1
Figure
0
0
20-21) is re-synchronized:
Start Bit Verification
Verification
Start Bit
0
Yes
Yes
Yes
Yes
No
No
No
No
0
Chapter 20 Serial Communication Interface (S12SCIV5)
Start Bit
0
Sampling
Data
0
0
Noise Flag
0
1
1
0
1
0
0
0
LSB
751