ATMEGA169PV-8AUR Atmel, ATMEGA169PV-8AUR Datasheet - Page 245

• Manufacturer Part Number: ATMEGA169PV-8AUR
• Description: MCU AVR 16KB FLASH 16MHZ 64TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA169PV-8AUR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Package: 64TQFP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 54
• Interface Type: SPI/USART/USI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8018P–AVR–08/10
Note:
Assembly Code Example
C Code Example
LCD_disable:
Wait_1:
Wait_2:
Void LCD_disable(void);
{
while ( !(LCDCRA & (1<<LCDIF)) )
while ( !(LCDCRA & (1<<LCDIF)) )
}
; Wait until a new frame is started.
lds
sbrs r16, LCDIF
rjmp Wait_1
; Set LCD Blanking and clear interrupt flag
; by writing a logical one to the flag.
ldi
sts
; Wait until LCD Blanking is effective.
lds
sbrs r16, LCDIF
rjmp Wait_2
; Disable LCD.
ldi
sts
ret
/* Wait until a new frame is started. */
;
/* Set LCD Blanking and clear interrupt flag */
/* by writing a logical one to the flag. */
LCDCRA = (1<<LCDEN)|(1<<LCDIF)|(1<<LCDBL);
/* Wait until LCD Blanking is effective. */
;
/* Disable LCD */
LCDCRA = (0<<LCDEN);
1.
See ”About Code Examples” on page 10.
r16, LCDCRA
r16, (1<<LCDEN)|(1<<LCDIF)|(1<<LCDBL)
LCDCRA, r16
r16, LCDCRA
r16, (0<<LCDEN)
LCDCRA, r16
(1)
(1)
ATmega169P
245