AT89C5131A-PUTUM Atmel, AT89C5131A-PUTUM Datasheet - Page 150

• Manufacturer Part Number: AT89C5131A-PUTUM
• Description: IC 8051 MCU FLASH 32K USB 32QFN
• Manufacturer: Atmel
• Series: AT89C513xr

Specifications of AT89C5131A-PUTUM

• Core Processor: C52X2
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: LED, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Core: 8051
• Processor Series: AT89x
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 48 MHz
• Data Ram Size: 1.25 KB
• Number Of Programmable I/os: 34
• Number Of Timers: 16 bit
• Operating Supply Voltage: 2.7 V to 5.5 V
• Mounting Style: SMD/SMT
• Height: 0.95 mm
• Interface Type: 2-Wire, EUART, SPI, USB
• Length: 7 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Width: 7 mm
• For Use With: AT89OCD-01 - USB EMULATOR FOR AT8XC51 MCUAT89STK-10 - KIT EVAL APPL MASS STORAGEAT89STK-05 - KIT STARTER FOR AT89C5131
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Details

150
AT89C5130A/31A-M
Table 21-16. UFNUMH Register
Reset Value = 00h
Table 21-17. UFNUML Register
Reset Value = 00h
Bit Number
Number
FNUM7
2-0
Bit
7 - 0
5
4
3
7
7
-
Bit Mnemonic Description
FNUM[10:8]
CRCERR
Mnemonic
FNUM[7:0]
CRCOK
UFNUMH (S:BBh, read-only)
USB Frame Number High Register
UFNUML (S:BAh, read-only)
USB Frame Number Low Register
FNUM6
-
Bit
6
6
-
Frame Number CRC OK
This bit is set by hardware when a new Frame Number in Start of Frame Packet is
received without CRC error.
This bit is updated after every Start of Frame packet receipt.
Important note: the Start of Frame interrupt is generated just after the PID receipt.
Frame Number CRC Error
This bit is set by hardware when a corrupted Frame Number in Start of Frame packet is
received.
This bit is updated after every Start of Frame packet receipt.
Important note: the Start of Frame interrupt is generated just after the PID receipt.
Reserved
The value read from this bit is always 0. Do not set this bit.
Frame Number
FNUM[10:8] are the upper 3 bits of the 11-bit Frame Number (see the
UFNUML (S:BAh, read-only) USB Frame Number Low Register” on page
provided in the last received SOF packet (see SOFINT in the
(S:BEh) USB Global Interrupt Enable Register” on page
corrupted SOF is received.
Description
Frame Number
FNUM[7:0] are the lower 8 bits of the 11-bit Frame Number
UFNUMH (S:BBh, read-only) USB Frame Number High Register” on page
CRCOK
FNUM5
5
5
CRCERR
FNUM4
4
4
FNUM3
3
3
-
FNUM10
FNUM2
2
2
141). FNUM is updated if a
(See “UFNUMH Register
“USBIEN Register USBIEN
FNUM9
FNUM1
1
1
“UFNUML Register
4337K–USB–04/08
150). It is
150.).
FNUM8
FNUM0
0
0