UPD78F9234MC-5A4-A Renesas Electronics America, UPD78F9234MC-5A4-A Datasheet - Page 295

• Manufacturer Part Number: UPD78F9234MC-5A4-A
• Description: MCU 8BIT 8KB FLASH 30PIN
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9234MC-5A4-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

19.8.4 Example of shifting normal mode to self programming mode
programming.
The operating mode must be shifted from normal mode to self programming mode before performing self
An example of shifting to self programming mode is explained below.
<1> Disable interrupts if the interrupt function is used (by setting the interrupt mask flag registers (MK0, MK1) to
<2> Clear FLCMD (FLCMD = 00H).
<3> Clear the flash status register (PFS).
<4> Set self programming mode using a specific sequence
<5> Execute NOP instruction and HALT instruction.
<6> Check the execution result of the specific sequence using bit 0 (FPRERR) of PFS.
<7> Mode shift is completed.
Note If the CPU clock is lower than 1 MHz, set it to be 1 MHz or higher.
Caution Be sure to perform the series of operations described above using the user program at an
FFH and executing the DI instruction).
Abnormal
Write a specific value (A5H) to PFCMD.
Write 01H to FLPMC (writing in this step is invalid).
Write 0FEH (inverted value of 01H) to FLPMC (writing in this step is invalid).
Write 01H to FLPMC (writing in this step is valid).
address where data is not erased or written.
<3>, normal
<7>
CHAPTER 19 FLASH MEMORY
User’s Manual U17446EJ5V0UD
Note
.
293