UPD78F9234MC-5A4-A Renesas Electronics America, UPD78F9234MC-5A4-A Datasheet - Page 39

• Manufacturer Part Number: UPD78F9234MC-5A4-A
• Description: MCU 8BIT 8KB FLASH 30PIN
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9234MC-5A4-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

3.2.3 Special function registers (SFRs)
bit manipulation instructions. Manipulatable bit units (1, 8, and 16) differ depending on the special function register
type.
Unlike the general-purpose registers, each special function register has a special function.
The special function registers are allocated to the 256-byte area FF00H to FFFFH.
The special function registers can be manipulated, like the general-purpose registers, with operation, transfer, and
Each manipulation bit unit can be specified as follows.
• 1-bit manipulation
• 8-bit manipulation
• 16-bit manipulation
Table 3-3 lists the special function registers. The meanings of the symbols in this table are as follows:
• Symbol
• R/W
• Number of bits manipulated simultaneously
• After reset
Describes a symbol reserved by the assembler for the 1-bit manipulation instruction operand (sfr.bit). This
manipulation can also be specified with an address and bit.
Describes a symbol reserved by the assembler for the 8-bit manipulation instruction operand (sfr).
manipulation can also be specified with an address.
Describes a symbol reserved by the assembler for the 16-bit manipulation instruction operand. When specifying
an address, describe an even address.
Indicates the addresses of the implemented special function registers. It is defined as a reserved word in the
RA78K0S, and is defined as an sfr variable using the #pragma sfr directive in the CC78K0S. Therefore, these
symbols can be used as instruction operands if an assembler or integrated debugger is used.
Indicates whether the special function register can be read or written.
R/W: Read/write
R:
W:
Indicates the bit units (1, 8, and 16) in which the special function register can be manipulated.
Indicates the status of the special function register when a reset signal is generated.
Read only
Write only
CHAPTER 3 CPU ARCHITECTURE
User’s Manual U17446EJ5V0UD
This
37