SAF-TC1130-L150EB-G BB Infineon Technologies, SAF-TC1130-L150EB-G BB Datasheet - Page 77

• Manufacturer Part Number: SAF-TC1130-L150EB-G BB
• Description: IC MCU 32BIT TRICOR 16KB LBGA208
• Manufacturer: Infineon Technologies
• Series: TC11xxr

Specifications of SAF-TC1130-L150EB-G BB

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, FIFO, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Type: ROMless
• Ram Size: 144K x 8
• Voltage - Supply (vcc/vdd): 1.43 V ~ 1.58 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LSBGA
• Data Bus Width: 32 bit
• Program Memory Size: 32 KB
• Data Ram Size: 144 KB
• Interface Type: 3xASC, 2xSSC, I2C, 2xMLI, Ethernet 10, 100 Mbits, s, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 72
• Number Of Timers: 9
• Operating Supply Voltage: 1.5 V, 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Packages: PG-LBGA-208
• Max Clock Frequency: 150.0 MHz
• Sram (incl. Cache): 144.0 KByte
• Can Nodes: 4
• Program Memory: 0.0 KByte
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: FT1130L150EBGBBXP; SAF-TC1130-L150EB-GBB; SAF-TC1130-L150EB-GBBINTR; SAF-TC1130-L150EB-GBBTR; SAF-TC1130-L150EB-GBBTR; SAFTC1130L150EBBBXT; SP000106119; SP000106538; SP000743584

TC1130
Functional Description
3.26
Power Sequencing
During power-up, reset pin PORST has to be held active until both power supply
voltages have reached at least their minimum values.
During the power-up time (rising of the supply voltages from 0 to their regular operating
values), it must be ensured that the core V
power supply reaches its operating value
DD
first, and then followed by the GPIO V
power supply. During the rising time of the
DDP
core voltage, it must be ensured that 0< V
-V
<0.5 V.
DD
DDP
During power-down, the core power supply V
and GPIO power supply V
must be
DD
DDP
switched off completely until all capacitances are discharged to zero before the next
power-up.
Note: The state of the pins are undefined when only the port voltage V
is switched
DDP
on.
Data Sheet
71
V1.1, 2008-12