SAK-C164CM-4EF AB Infineon Technologies, SAK-C164CM-4EF AB Datasheet - Page 10

• Manufacturer Part Number: SAK-C164CM-4EF AB
• Description: IC MCU 16BIT 32KB OTP TQFP-64-4
• Manufacturer: Infineon Technologies
• Series: C16xxr

Specifications of SAK-C164CM-4EF AB

• Core Processor: C166
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, EBI/EMI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: OTP
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LFQFP
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: 1xASC, 1xSSC
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Packages: P-TQFP-64
• Max Clock Frequency: 20.0 MHz
• Sram (incl. Cache): 2.0 KByte
• Can Nodes: 1
• A / D Input Lines (incl. Fadc): 8
• Program Memory: 32.0 KByte
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SAK-C164CM-4EFAB; SAK-C164CM-4EFABINTR; SAK-C164CM-4EFABTR; SAK-C164CM-4EFABTR; SAKC164CM4EFABXT; SP000056829; SP000104063

Table 2
Symbol Pin
RSTIN
Data Sheet
No.
27
Pin Definitions and Functions (cont’d)
Input
Outp.
I/O
Function
Reset Input with Schmitt-Trigger characteristics. A low level
at this pin while the oscillator is running resets the C164CM.
An internal pullup resistor permits power-on reset using only
a capacitor connected to
A spike filter suppresses input pulses <10 ns. Input pulses
>100 ns safely pass the filter. The minimum duration for a
safe recognition should be 100 ns + 2 CPU clock cycles.
In bidirectional reset mode (enabled by setting bit BDRSTEN
in register SYSCON) the RSTIN line is internally pulled low
for the duration of the internal reset sequence upon any reset
(HW, SW, WDT). See note below this table.
Note: To let the reset configuration of PORT0 settle and to
let the PLL lock a reset duration of ca. 1 ms is
recommended.
6
V
SS
.
V1.0, 2001-05
C164CM
C164SM