ML610Q429-NNNTBZ03A7 Rohm Semiconductor, ML610Q429-NNNTBZ03A7 Datasheet - Page 319

• Manufacturer Part Number: ML610Q429-NNNTBZ03A7
• Description: MCU 8BIT 48K FLASH 128-TQFP
• Manufacturer: Rohm Semiconductor

Specifications of ML610Q429-NNNTBZ03A7

• Core Processor: nX-U8/100
• Core Size: 8-Bit
• Speed: 4.2MHz
• Connectivity: I²C, SSP, UART/USART
• Peripherals: LCD, Melody Driver, POR, PWM, WDT
• Number Of I /o: 20
• Program Memory Size: 48KB (24K x 16)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 2x12b, 2x24b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 70°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

24.
24.1 Overview
This LSI includes LCD drivers that display the contents that are set in the display register.
The LCD drivers handle the LCD display functions with four blocks.
The display registers are used to store the contents to be displayed as bit patterns.
The bit pattern storage method depends on the specification of the LCD panel to be used (display pattern and assignment
of the COM pin and SEG pin) and the setting of the display allocation circuit.
The display allocation block controls mapping of the display register for the LCD common/segment.
Using the display allocation register A and B or not using them is selectable. When using them (Set DASN bit of
DSPMOD1 register to “1”), the segment mapping of the display register can be specified in bit units by programming
according to the contents of display allocation registers A and B. Therefore, the display register array can be changed in
flexible and simplify the software process for display (This function is defined as the programmable display allocation
function in the user’s manual). Also, the data specified to the register A and B can be easily prepared by using Oki
semiconductor LCD allocation Tool. Select type 3 for the display register segment map when using the programmable
allocation function. Oki semiconductor LCD Tool only generates table data can be used for the type 3.
When not using the display allocation register A and B (Set DASN bit of DSPMOD1 register to “0”), select one of three
types of display registers segment map and control the display with the display register only.
The display control circuit generates LCD drive waveforms according to the characteristics of the LCD.
A bias, a bias voltage multiplying clock, a duty, a frame frequency, and a contrast suitable for the LCD panel can be
selected.
Note:
- The programmable display allocation function is available only when 1/1~1/8 duty is selected (when using eight COMs
or less for display), it does not work when 1/9~1/24 duty is selected (when using nine COMs or more for display).
- Select type 3 for the display register segment map (Set DADM1 bit of DSPMOD1 register to “1”) when using the
programmable allocation function. Oki semiconductor LCD Tool only generates table data can be used for the type 3.
- When the programmable display function is not used (DASN = “0”), display allocation register A (0F400H to 0F5FFH)
and display allocation register B (0F600H to 0F7FFH) can be used as 1K-byte data memory(RAM).
1. Display registers
2. Display allocation
3. Display control
4. Drivers
DSPRFD
DSPR02
DSPR01
DSPR00
DSPRFE
LCD Drivers
Display registers
Select by DADM1, DADM0,and DASN bit (DSPMOD1 register)
Figure 24-1 Configuration of LCD Display Function
Segment map
configuration
Type1
Type2
Typ3
or
or
Display allocation
Type
Type1 or 2 or 3
Allocation
Allocation
Register A, B
RAM
24 – 1
1
0
Bias
Bias multiplying clock
Duty
Contrast
Frame frequency
ML610Q428/ML610Q429 User’s Manual
COM driver
SEG driver
Display control
Drivers
SEG
Chapter 24 LCD Drivers
COM pins
Panel
LCD