TOOTHPIC RF Solutions, TOOTHPIC Datasheet - Page 17

• Manufacturer Part Number: TOOTHPIC
• Description: MODULE, BLUETOOTH, DATA ACQUISITION
• Manufacturer: RF Solutions

Specifications of TOOTHPIC

• Svhc: No SVHC (15-Dec-2010)

Application Development in MPLAB
To examine the code for this application, you will need to be familiar with the Microchip Technology MPLAB
development environment and C18 compiler. The MPLAB development environment and C18 compiler must
be obtained separately from Microchip Technology Inc or one of its distributors.
A debugger or programmer will also be required. For product development, the Microchip ICD-2 in-circuit
debugger is recommended. For programming, the following connections must be made between the ICD2
debugger and ToothPIC
The cable from the debugger to the ToothPIC needs to be short. An adapter cable is available for connecting
directly from the ICD2 to a ToothPIC plugged into a breadboard – see the Ordering Information section.
The following steps explain how to create the MPLAB project from scratch. You can alternatively load the
project HelloWorldBit.mcw (found in the Development Kit) into MPLAB
Page 17
1. Create a project named in MPLAB with the following characteristics:
2. Copy the following files from the Development Kit directory to your project directory and include them
If you forget any of these, the project will still compile, but it won’t run correctly. Note, in particular, the
last three items may result in behavior that seems right at first but may later behave unexpectedly,
making debugging difficult. Please check these have been set before calling technical support.
in the project:
The above files contain the information about ToothPIC Services and are included in all applications.
They do not need to be modified from their original form.
9-Apr-06
•
•
•
•
•
•
•
•
•
•
•
•
•
• Multi-Bank Stack Model
•
• ToothPicMath303.o, the ToothPIC math libraries object file in the development kit main
• ToothPIC303.lib, the ToothPIC Services library in the development kit main directory.
•
Device PIC18F6720
HS oscillator configuration
Watchdog timer off
Watchdog timer postscaler 1:128
Power-up timer on
Oscillator switch enabled
CCP2 Mux RE7
Table Write Protect 00200-03FFF enabled
Table Write Protect 04000-08FFF enabled
Table Write Protect 08000-0BFFF enabled
Table Write Protect 00000-001FF enabled
Large Code Model
Large Data Model
ToothPIC.h, the ToothPIC Services header file in the development kit main directory.
directory.
ToothPIC303.lkr, the ToothPIC linker script in the development kit main directory.
Pin name on ToothPIC
Toothpick 3.0.00007
INT0/PGC
INT1/PGD
NMCLR
Vdd
Vss
DS380-8
© FlexiPanel Ltd
Name in MicroChip’s Terminology
Patents apply and/or pending
NMCLR
PGC
PGD
Vdd
Vss
www.FlexiPanel.com