TOOTHPIC RF Solutions, TOOTHPIC Datasheet - Page 57

• Manufacturer Part Number: TOOTHPIC
• Description: MODULE, BLUETOOTH, DATA ACQUISITION
• Manufacturer: RF Solutions

Specifications of TOOTHPIC

• Svhc: No SVHC (15-Dec-2010)

Configure ToothPIC Slave Command
The command byte 0x01 configures the general properties of the ToothPIC Slave. The byte after the
command byte is the Property Byte, which specifies the exact property being set. The remaining bytes
represent the new property value, as follows:
Page 57
9-Apr-06
Configure ToothPIC Slave Command Properties
Property Byte
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0A
0x0B
0x0C
Toothpick 3.0.00007
Property
Security level*
Baud rate*
Authentication PIN*
Device name*
Flow control*
Host has Rx buffer*
Response queue
length*
Initialization
response*
Responses
anytime*
ASCII responses*
On internal error…*
I2C memory setup*
DS380-8
© FlexiPanel Ltd
Remaining Byte(s)
00 = None (default)
01 = Authentication
02 = Authentication and encryption
01 = 1220 baud
02 = 2400 baud
03 = 4800 baud
04 = 9600 baud (default)
05 = 19200 baud
06 = 38400 baud
07 = 57600 baud
08 = 115200 baud
Zero terminated ASCII pin code (maximum
16 characters plus zero terminator)
Zero terminated ASCII device name
(maximum 16 characters plus zero
terminator)
00 = None (default)
01 = CTS on INT1, RTS on INT0
02 = CTS on INT1, RTS on SDO
03 = CTS on INT1, RTS on CCP1
04 = CTS on INT1, RTS on AN11
05 = CTS on INT1, RTS on SCL
10 = CTS on INT1, no RTS
00 = CTS must be strictly observed
FF = Host can accept one more byte after
1 byte = number of responses that can be
queued (see notes)
00 = No initialization response
FF = Generate an initialization response
00 = Transmits responses only in reply to a
FF = Transmits responses immediately
00 = Generates binary responses
FF = Generates ASCII responses (default)
01 = Flash error number, reset on button
02 = Reset immediately
03 = Send unsolicited error response to
00 = No I2C memory (default)
01 = I2C memory with 100kHz clock speed
02 = I2C memory with 400kHz clock speed
CTS goes high
(default)
GetResponse command
(default)
press
host (default)
Patents apply and/or pending
www.FlexiPanel.com