M66291GP#201 Renesas Electronics America, M66291GP#201 Datasheet - Page 101

• Manufacturer Part Number: M66291GP#201
• Description: IC USB CONTROLLER GEN-PUR 48LQFP
• Manufacturer: Renesas Electronics America

Specifications of M66291GP#201

• Package / Case: 48-LQFP
• Mounting Type: Surface Mount
• Current - Supply: 30mA
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -20°C ~ 85°C
• Interface: Serial
• Controller Type: USB 2.0 Controller
• Lead Free Status / RoHS Status: Not Compliant

M 6 6 2 9 1 G P / H P
3.5.6
R e v 1 . 0 1
Clock
48 MHz clock is needed for the internal operation of the M66291.
A built-in PLL enables an external clock of 6, 12, 24, or 48 MHz to be input. Selection is realized by XTAL bit
of the USB Operation Enable Register. When an external 48 MHz clock is used, the PLL is not needed, so the
PLL operation should be disabled.
A built-in oscillation buffer enables the device to be clocked from a crystal unit.
The device is set to standby state by the USB Operation Enable Register. Oscillation is halted (clock input
halted) by XCKE bit, PLL is halted by PLLC bit, and clock supply to the USB block is halted by SCKE bit.
To prevent unstable behavior, clock supply to USB block must be applied as follow:
a. Enables clock input by the XCKE,
b. Wait until oscillation stabilizes,
c. Start PLL by the PLLC bit,
d. Wait until PLL oscillation stabilizes (less than 1ms),
e. then start clock supply to USB block by the SCKE bit.
2 0 0 4 . 1 1 . 0 1
p a g e 1 0 1 o f 1 2 2