U3402A-ABA AGILENT TECHNOLOGIES, U3402A-ABA Datasheet - Page 124

• Manufacturer Part Number: U3402A-ABA
• Description: English Users And Service Guide 3400
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of U3402A-ABA

• Rohs Compliant: NA
• For Use With: U3400 Series U3402A Dual Display Multimeter

6
104
Specifications and Characteristics
Table 6-13 Supplemental measurement specifications
Measurement
AC current
(true RMS, AC
coupling mode)
AC current
(true RMS,
AC+DC
coupling mode)
Resistance
(2-wire
4-wire )
and
Measurement method
Crest factor
Shunt resistance
Input protection
Response time
Measurement method
Crest factor
Measurement range
Response time
Measurement method
Open-circuit voltage
Zeroing error
Input protection
Response time
Specification
DC coupled to the fuse and current shunt, AC
coupled true RMS measurement (measures the
AC component only)
Maximum 3:0 at full scale
0.1
0.01
mA input terminal: 1200 mADC or AC RMS.
Protected with 1.25 A/500 V, IEC-127 sheet, FH
fuse
12 A input terminal: 10 ADC or AC RMS
continuous, or 12 ADC or AC RMS for 30 seconds
maximum. Protected with 15 A/600 V, breaking
capacity 10,000 A FH fuse.
Approximately 1.5 seconds when the displayed
reading reaches 99.9% AC RMS value of the
tested input signal at the same range.
AC+DC coupled to the fuse and current shunt,
AC+DC coupled true RMS measurement
(measures the AC component only)
Maximum 3:0 at full scale
Vdc and Vac are automatically set at the same
range.
Approximately 1.5 seconds when the displayed
reading reaches 99.9% AC RMS value of the
tested input signal at the same range.
2-wire Ohms or 4-wire Ohms
Limited to < +5 VDC
0.05
each range when Rel operation is used.
500 V on all ranges
Approximately 1.5 seconds for 12 M and ranges
below 12 M ;
Approximately 5 seconds for 40 M ;
Approximately 10 seconds for 120 M ;
Approximately 23 seconds for 300 M ;
to 10
for 12 A range
or less (excluding test lead resistance) in
U3402A User’s and Service Guide
for 10 mA to 1.2 A ranges