U3402A-ABA AGILENT TECHNOLOGIES, U3402A-ABA Datasheet - Page 66

• Manufacturer Part Number: U3402A-ABA
• Description: English Users And Service Guide 3400
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of U3402A-ABA

• Rohs Compliant: NA
• For Use With: U3400 Series U3402A Dual Display Multimeter

2
46
Operations and Features
Comp
The Comp (compare) operation allows you to perform pass/fail testing against
specified upper and lower limits. You can set the upper and lower limits to any
value between 0 and
Figure 2-17 Typical Comp operation display
When enabled, the actual readings are shown in primary display and the
comparison results such as HI, LO, or PASS is shown in secondary display.
• You should specify the upper limit to always be a more positive number
• The secondary display shows PASS when readings are within the specified
• When the beeper is ON (see
• Press
Procedure
1 Press
2 Use
than the lower limit. The initial factory setting for LO limit is 0.
limits. The secondary display shows HI when the reading is outside the high
limit and LO when the reading is outside the low limit.
beeps on the transition from PASS to HI or PASS to LO or when transitioning
directly from HI to LO or LO to HI (no PASS in between).
The upper limit is shown on primary display while the HI annunciator is
shown on secondary display.
,
,
to enter the upper limit setup mode.
\
to enable Comp operation.
1 00% of the highest range for the present function.
, and
“Using the Setup Menu”
to modify the upper limit.
U3402A User’s and Service Guide
on page 38), the beeper