CYNSE70128-66BGC Cypress Semiconductor Corp, CYNSE70128-66BGC Datasheet - Page 53

no-image

CYNSE70128-66BGC

Manufacturer Part Number
CYNSE70128-66BGC
Description
Manufacturer
Cypress Semiconductor Corp
Datasheet

Specifications of CYNSE70128-66BGC

Operating Supply Voltage (min)
1.425V
Operating Temp Range
0C to 70C
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Lead Free Status / Rohs Status
Not Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CYNSE70128-66BGC
Manufacturer:
CY
Quantity:
59
Part Number:
CYNSE70128-66BGC
Manufacturer:
CYPRESS
Quantity:
329
Part Number:
CYNSE70128-66BGC
Manufacturer:
NS
Quantity:
7
Part Number:
CYNSE70128-66BGC
Manufacturer:
CYPRESS
Quantity:
2
Part Number:
CYNSE70128-66BGC
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
Table 10-19. Shift OF SSF and SSV from SADR (continued)
10.6.5
The hardware diagram of the search subsystem of eight devices is shown in Figure 10-30. The following are parameters
programmed into the eight devices.
Note
programmed with LRAM = 1 and LDEV = 1 (device number 7 in this case). All other upstream devices must be programmed with
LRAM = 0 and LDEV = 0 (devices 0 through 6 in this case).
Figure 10-31 shows the timing diagram for a Search command in the 144-bit-configured table of eight devices for device 0.
Figure 10-32 shows the timing diagram for a Search command in the 144-bit-configured table consisting of eight devices for
device number 1. Figure 10-33 shows the timing diagram for a Search command in the 144-bit configured table consisting of
eight devices for device number 7 (the last device in this specific table). For these timing diagrams, four 144-bit searches are
performed sequentially, and the following Hit/Miss assumptions were made (see Table 10-20).
Table 10-20. Hit/Miss Assumption
Document #: 38-02040 Rev. *F
• First seven devices (devices 0–6): CFG = 0101010101010101, TLSZ = 01, HLAT = 010, LRAM = 0, and LDEV = 0.
• Eighth device (device 7): CFG = 0101010101010101, TLSZ = 01, HLAT = 010, LRAM = 1, and LDEV = 1.
. All eight devices must be programmed with the same value of TLSZ and HLAT. Only the last device in the table must be
Search Number
Device 2–6
144-bit Search on Tables Configured as x144 Using up to Eight CYNSE70128 Devices
Device 0
Device 1
Device 7
HLAT
100
101
110
111
Miss
Miss
Miss
Hit
1
Miss
Miss
Miss
Hit
2
Number of CLK Cycles
4
5
6
7
Miss
Hit
Hit
Hit
3
CYNSE70128
Page 53 of 137
Miss
Miss
Miss
Hit
4

Related parts for CYNSE70128-66BGC