SDKZSPF LSI, SDKZSPF Datasheet - Page 113

• Manufacturer Part Number: SDKZSPF
• Manufacturer: LSI

Specifications of SDKZSPF

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Table 6.9
Option
-O bfdname |
--output-target=bfdname
-b byte | --byte=byte
-i interleave | --
interleave=interleave
--gap-fill val
--pad-to address
--set-start val
sdobjcopy Options
The source and output files, respectively. If you do not specify outfile,
objcopy creates a temporary file and destructively renames the result
with the name of infile.
Options –
sdobjcopy
Copyright © 1999-2003 by LSI Logic Corporation. All rights reserved.
Description
Write the output file using the object format bfdname.
Keep only every byteth byte of the input file (header data is not
affected). byte can be in the range from 0 to interleave-1, where
interleave is given by the -i or --interleave option, or the default
of 4. This option is useful for creating files to program ROM. It is
typically used with an srec output target.
Copy only one out of every interleave bytes. Select which byte to copy
with the -b or --byte option. The default is 4. objcopy ignores this
option if you do not specify either -b or --byte.
Fill gaps between sections with val. This operation applies to the load
address (LMA) of the sections. It is done by increasing the size of the
section with the lower address, and filling in the extra space created
with val.
Pad the output file up to the load address address by increasing the
size of the last section. The extra space is filled in with the value
specified by --gap-fill (default zero).
Set the address of the new file to val. Not all object file formats
support setting the start address.
6-13