SDKZSPF LSI, SDKZSPF Datasheet - Page 171

• Manufacturer Part Number: SDKZSPF
• Manufacturer: LSI

Specifications of SDKZSPF

• Lead Free Status / Rohs Status: Supplier Unconfirmed

8.2.31 set reg
8.2.32 set size
8.2.32.1 set size for zsim400
8.2.32.2 set size for zsimg2
This command assigns a new value to the specified register.
Format –
Example –
The format of this command is different for the two simulators.
This command sets the size of internal data memory or instruction
memory. The default size of internal data or instruction memory is 63488
words (62 Kwords), which is also the maximum size that can be set.
Important:
Format –
Examples –
This command sets the size of internal/external instruction or data
memory from a begin value to an end value. The boundary is inclusive.
The default size for each of the 4 memory types is the maximum value
from 0 to 0x00FF.FFFF words (16 Mwords). A word is a 16-bit value for
the ZSPG2 architecture.
ZSIM Commands
Copyright © 1999-2003 by LSI Logic Corporation. All rights reserved.
set reg register value
zsim{32} set reg r0 0x1234
set size {dmem|imem} size
zsim{1} set size dmem 0x4000
zsim{2} set size imem 0x3000
This command does not apply to external memory. (The
simulator has 1 Mwords for each external instruction and
external data memory.)
8-29