SAK-C167CS-L33M Infineon Technologies, SAK-C167CS-L33M Datasheet - Page 17

• Manufacturer Part Number: SAK-C167CS-L33M
• Manufacturer: Infineon Technologies

Specifications of SAK-C167CS-L33M

• Cpu Family: C166
• Device Core Size: 16b
• Frequency (max): 33MHz
• Interface Type: CAN/SPI/USART
• Program Memory Type: ROMLess
• Program Memory Size: Not Required
• Total Internal Ram Size: 11KB
• # I/os (max): 111
• Number Of Timers - General Purpose: 5
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 24-chx10-bit
• Instruction Set Architecture: CISC/RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: MQFP
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Table 2
Symbol Pin
V
V
1)
Note: The following behaviour differences must be observed when the bidirectional reset
• Bit BDRSTEN in register SYSCON cannot be changed after EINIT and is cleared
• The reset indication flags always indicate a long hardware reset.
• The PORT0 configuration is treated like on a hardware reset. Especially the bootstrap
• Pin RSTIN may only be connected to external reset devices with an open drain output
• A short hardware reset is extended to the duration of the internal reset sequence.
Data Sheet
DD
SS
The CAN interface lines are assigned to ports P4 and P8 under software control. Within the CAN module
several assignments can be selected.
automatically after a reset.
loader may be activated when P0L.4 is low.
driver.
is active:
Num.
17, 46,
56, 72,
82, 93,
109,
126,
136,
144
18, 45,
55, 71,
83, 94,
110,
127,
139,
143
Pin Definitions and Functions (cont’d)
Input
Outp.
–
–
Function
Digital Supply Voltage:
+5 V during normal operation and idle mode.
≥ 2.5 V during power down mode.
Digital Ground.
13
C167CS-4R
V2.2, 2001-08
C167CS-L