SAM3N4B Atmel Corporation, SAM3N4B Datasheet - Page 115

• Manufacturer Part Number: SAM3N4B
• Manufacturer: Atmel Corporation

Specifications of SAM3N4B

• Flash (kbytes): 256 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 48 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 79
• Ext Interrupts: 79
• Quadrature Decoder Channels: 2
• Usb Speed: No
• Usb Interface: No
• Spi: 3
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 10
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 1
• Dac Resolution (bits): 10
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 24
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

10.13.6.4
10.13.6.5
11011A–ATARM–04-Oct-10
MOVS
MOV
MOVS
MOV
MOV
MVNS
Condition flags
Example
R11, #0x000B
R1, #0xFA05
R10, R12
R3, #23
R8, SP
R2, #0xF
Though it is possible to use MOV as a branch instruction, ARM strongly recommends the use of
a BX or BLX instruction to branch for software portability to the ARM instruction set.
If S is specified, these instructions:
• bit[0] of the value written to the PC is ignored
• a branch occurs to the address created by forcing bit[0] of that value to 0.
• update the N and Z flags according to the result
• can update the C flag during the calculation of Operand2, see
• do not affect the V flag.
page 80
; Write value of 0x000B to R11, flags get updated
; Write value of 0xFA05 to R1, flags are not updated
; Write value in R12 to R10, flags get updated
; Write value of 23 to R3
; Write value of stack pointer to R8
; Write value of 0xFFFFFFF0 (bitwise inverse of 0xF)
; to the R2 and update flags
“Flexible second operand” on
SAM3N
115