SAM3N4B Atmel Corporation, SAM3N4B Datasheet - Page 88

• Manufacturer Part Number: SAM3N4B
• Manufacturer: Atmel Corporation

Specifications of SAM3N4B

• Flash (kbytes): 256 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 48 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 79
• Ext Interrupts: 79
• Quadrature Decoder Channels: 2
• Usb Speed: No
• Usb Interface: No
• Spi: 3
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 10
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 1
• Dac Resolution (bits): 10
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 24
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

10.12.1
10.12.1.1
10.12.1.2
10.12.1.3
10.12.1.4
10.12.1.5
88
ADR
SAM3N
ADR
Syntax
Operation
Restrictions
Condition flags
Examples
R1, TextMessage
Load PC-relative address.
where:
cond
Rd
label
ADR determines the address by adding an immediate value to the PC, and writes the result to
the destination register.
ADR produces position-independent code, because the address is PC-relative.
If you use ADR to generate a target address for a BX or BLX instruction, you must ensure that
bit[0] of the address you generate is set to1 for correct execution.
Values of label must be within the range of − 4095 to +4095 from the address in the PC.
You might have to use the .W suffix to get the maximum offset range or to generate addresses
that are not word-aligned. See
Rd must not be SP and must not be PC.
This instruction does not change the flags.
ADR{cond} Rd, label
is an optional condition code, see
is the destination register.
is a PC-relative expression. See
; Write address value of a location labelled as
; TextMessage to R1
“Instruction width selection” on page
“PC-relative expressions” on page
“Conditional execution” on page
86.
11011A–ATARM–04-Oct-10
84.
84.