SPFD54124B Drise, SPFD54124B Datasheet - Page 59

• Manufacturer Part Number: SPFD54124B
• Description: 396-Channel 6-Bit Source Driver
• Manufacturer: Drise

www.DataSheet4U.com
6.2.28. TEON (35h): Tearing Effect Line ON
NOTE: “-” Don’t care, can be set to VDDIO or DGND level
© ORISE Technology Co., Ltd.
Proprietary & Confidential
1
st
Inst / Para
Description
Flow Chart
Restriction
Availability
Parameter
Register
TEON
Default
35H
-This command is used to turn ON the Tearing Effect output signal from the TE signal line.
-This output is not affected by changing MADCTR bit ML.
-The Tearing Effect Line On has one parameter, which describes the mode of the Tearing Effect Output Line.
－When M=’0’:
－When M=’1’:
Note: During Sleep In Mode with Tearing Effect Line On, Tearing Effect Output pin will be active Low.
-This command has no effect when Tearing Effect output is already OFF.
D/CX
(“-“=Don’t Care).
The Tearing Effect Output line consists of V-Blanking information only.
The Tearing Effect Output line consists of both V-Blanking and H-Blinking information.
0
1
Normal Mode On, Idle Mode Off, Sleep Out
Normal Mode On, Idle Mode On, Sleep Out
Partial Mode On, Idle Mode Off, Sleep Out
Partial Mode On, Idle Mode On, Sleep Out
time scale
time scale
Vertical
Vertical
WRX
↑
↑
TE Line Output OFF
TE Line Output ON
1
st
Power On Sequence
RDX
Parameter: (M)
TEON (35h)
1
1
S/W Reset
H/W Reset
Sleep In
Status
Status
D17-8
-
-
D7
0
0
TEON (Tearing Effect Line ON)
D6
0
0
59
D5
1
0
tvdl
tvdl
D4
1
0
Tearing effect off & TELOM=0
Tearing effect off & TELOM=0
Tearing effect off & TELOM=0
D3
0
0
Default Value
Availability
Yes
Yes
Yes
Yes
Yes
D2
1
0
SPFD54124B
tvdh
tvdh
Preliminary
D1
Parameter
Sequential
0
0
Command
transfer
Legend
Preliminary Version: 0.6
Display
Action
Mode
TELOM
D0
1
APR. 26, 2007
(Code)
(35h)