upd78f0114m6gb-8es Renesas Electronics Corporation., upd78f0114m6gb-8es Datasheet - Page 334

• Manufacturer Part Number: upd78f0114m6gb-8es
• Description: 8-bit Single-chip Microcontrollers
• Manufacturer: Renesas Electronics Corporation.

15.4.4 Interrupt request hold
executed, request acknowledgment is held pending until the end of execution of the next instruction.
instructions (interrupt request hold instructions) are listed below.
334
CPU processing
There are instructions where, even if an interrupt request is issued for them while another instruction is being
• MOV PSW, #byte
• MOV A, PSW
• MOV PSW, A
• MOV1 PSW. bit, CY
• MOV1 CY, PSW. bit
• AND1 CY, PSW. bit
• OR1 CY, PSW. bit
• XOR1 CY, PSW. bit
• SET1 PSW. bit
• CLR1 PSW. bit
• RETB
• RETI
• PUSH PSW
• POP PSW
• BT PSW. bit, $addr16
• BF PSW. bit, $addr16
• BTCLR PSW. bit, $addr16
• EI
• DI
• Manipulation instructions for the IF0L, IF0H, IF1L, MK0L, MK0H, MK1L, PR0L, PR0H, and PR1L registers
Caution The BRK instruction is not one of the above-listed interrupt request hold instructions. However,
Figure 15-11 shows the timing at which interrupt requests are held pending.
Remarks 1. Instruction N: Interrupt request hold instruction
××IF
the software interrupt activated by executing the BRK instruction causes the IE flag to be cleared
to 0. Therefore, even if a maskable interrupt request is generated during execution of the BRK
instruction, the interrupt request is not acknowledged.
2. Instruction M: Instruction other than interrupt request hold instruction
3. The ××PR (priority level) values do not affect the operation of ××IF (interrupt request).
Instruction N
Figure 15-11. Interrupt Request Hold
CHAPTER 15 INTERRUPT FUNCTIONS
User’s Manual U16227EJ3V0UD
Instruction M
PSW and PC saved, jump
to interrupt servicing
Interrupt servicing
program
These