upd78f0114m6gb-8es Renesas Electronics Corporation., upd78f0114m6gb-8es Datasheet - Page 508

• Manufacturer Part Number: upd78f0114m6gb-8es
• Description: 8-bit Single-chip Microcontrollers
• Manufacturer: Renesas Electronics Corporation.

508
This appendix lists cautions described in this document.
“Classification (hard/soft)” in table is as follows.
Hard:
Soft:
Operating
frequency
rating
Pin
connection
Memory
space
Port
function
Function
Cautions for microcontroller internal/external hardware
Cautions for software such as register settings or programs
Peripheral
function: Count
clock, base
clock
Flash memory
IMS: Memory
size switching
register
SFR area:
Special function
register
SP: Stack
pointer
P10, P11, P12
P60 to P63
Details of
Function
−
−
The specifications of the peripheral functions (timer, serial interface, A/D
converter, etc.) are conventional when operating at V
Therefore, to select the count clock or base clock of a peripheral function, satisfy
the following conditions.
• V
• V
• V
• V
Rewrite the flash memory in the ranges of f
V as ever.
Connect the IC (Internally Connected) pin directly to V
Connect the AV
Connect the V
Regardless of the internal memory capacity, the initial value of the internal
memory size switching register (IMS) of all 78K0/KC1 products is fixed (IMS =
CFH). Therefore, set the value corresponding to each product as indicated
below.
•
•
•
•
•
Do not access addresses to which SFRs are not assigned.
Since RESET input makes the SP contents undefined, be sure to initialize the
SP before using the stack.
When P10/SCK10/TxD0, P11/SI10/RxD0, and P12/SO10 are used as general-
purpose ports, do not write to serial clock selection register 10 (CSIC10).
Use of a pull-up resistor can be specified for P60 to P63 pins by a mask option
only in the mask ROM versions.
In the case of a 1-bit memory manipulation instruction, although a single bit is
manipulated, the port is accessed as an 8-bit unit. Therefore, on a port with a
mixture of input and output pins, the output latch contents for pins specified as
input are undefined, even for bits other than the manipulated bit.
µ
µ
µ
µ
µ
APPENDIX D LIST OF CAUTIONS
PD780111:
PD780112:
PD780113:
PD780114:
PD78F0114:
DD
DD
DD
DD
= 4.0 to 5.5 V: Count clock or base clock ≤ 10 MHz
= 3.3 to 4.0 V: Count clock or base clock ≤ 8.38 MHz
= 2.7 to 3.3 V: Count clock or base clock ≤ 5 MHz
= 2.5 to 2.7 V: Count clock or base clock ≤ 2.5 MHz
User’s Manual U16227EJ3V0UD
PP
SS
pin to EV
42H
44H
C6H
C8H
Value corresponding to mask ROM version
pin to V
SS
SS
or V
.
SS
during normal operation.
Cautions
X
= 2 to 10 MHz and V
DD
SS
= 2.7 to 5.5 V.
.
DD
= 2.7 to 5.5
p. 17
p. 17
p. 22
p. 22
p. 22
p. 44
p. 51
p. 59
p. 83
p. 98
p. 99
Page
(1/22)