mc68hc908jb8 Freescale Semiconductor, Inc, mc68hc908jb8 Datasheet - Page 77

• Manufacturer Part Number: mc68hc908jb8
• Description: M68hc08 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

6.6.2 Stop Mode
6.7 CPU During Break Interrupts
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
Freescale Semiconductor
The STOP instruction:
After exiting stop mode, the CPU clock begins running after the oscillator
stabilization delay.
If a break module is present on the MCU, the CPU starts a break
interrupt by:
The break interrupt begins after completion of the CPU instruction in
progress. If the break address register match occurs on the last cycle of
a CPU instruction, the break interrupt begins immediately.
A return-from-interrupt instruction (RTI) in the break routine ends the
break interrupt and returns the MCU to normal operation if the break
interrupt has been deasserted.
•
•
•
•
Clears the interrupt mask (I bit) in the condition code register,
enabling external interrupts. After exit from stop mode by external
interrupt, the I bit remains clear. After exit by reset, the I bit is set.
Disables the CPU clock
Loading the instruction register with the SWI instruction
Loading the program counter with $FFFC:$FFFD or with
$FEFC:$FEFD in monitor mode
Central Processor Unit (CPU)
Central Processor Unit (CPU)
CPU During Break Interrupts
Technical Data
77