lan9311 Standard Microsystems Corp., lan9311 Datasheet - Page 248

• Manufacturer Part Number: lan9311
• Description: Lan9311/lan9311i Two Port 10/100 Managed Ethernet Switch With 16-bit Non-pci Cpu Interface
• Manufacturer: Standard Microsystems Corp.

Revision 1.2 (04-08-08)
BITS
5:0
7
6
Collision Test (VPHY_COL_TEST)
This bit enables/disables the collision test mode. When set, the collision
signal to the Host MAC is active during transmission from the Host MAC.
Note:
0: Collision test mode disabled
1: Collision test mode enabled
Speed Select MSB (VPHY_SPEED_SEL_MSB)
This bit is not used by the Virtual PHY and has no effect. The value returned
is always 0.
RESERVED
Note 14.16 The reserved bits 31-16 are used to pad the register to 32-bits so that each register is on
It is recommended that this bit be used only when in loopback
mode.
a DWORD boundary. When accessed serially (through the MII management protocol), the
register is 16-bits wide.
DESCRIPTION
DATASHEET
248
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
TYPE
R/W
RO
RO
SMSC LAN9311/LAN9311i
DEFAULT
Datasheet
0b
0b
-