lan9311 Standard Microsystems Corp., lan9311 Datasheet - Page 343

• Manufacturer Part Number: lan9311
• Description: Lan9311/lan9311i Two Port 10/100 Managed Ethernet Switch With 16-bit Non-pci Cpu Interface
• Manufacturer: Standard Microsystems Corp.

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
14.5.2.19
BITS
31:0
RX Bytes
Count of total bytes received (including bad packets).
Note:
Port x MAC Receive Packet Length Count Register (MAC_RX_PKTLEN_CNT_x)
This register provides a counter of total bytes received. The counter is cleared upon being read.
Note: If necessary, for oversized packets, the packet is either truncated at 1518 bytes (untagged,
Note: A bad packet is one that has an FCS or Symbol error. For this counter, a packet that is not an
This counter will stop at its maximum value of FFFF_FFFFh.
Minimum rollover time at 100Mbps is approximately 5.8 hours.
Jumbo2K=0), 1522 bytes (tagged, Jumbo2K=0), or 2048 bytes (Jumbo2K=1). If this occurs,
the byte count recorded is 1518, 1522, or 2048, respectively. The Jumbo2K bit is located in
the
integral number of bytes (e.g. a 1518 1/2 byte packet) is rounded down to the nearest byte.
Register #:
Port x MAC Receive Configuration Register
Port0: 0420h
Port1: 0820h
Port2: 0C20h
DESCRIPTION
DATASHEET
343
Size:
(MAC_RX_CFG_x).
32 bits
TYPE
RC
Revision 1.2 (04-08-08)
00000000h
DEFAULT