saa6703ah NXP Semiconductors, saa6703ah Datasheet - Page 76

• Manufacturer Part Number: saa6703ah
• Description: Xga Analog Input Flat Panel Controller.
• Manufacturer: NXP Semiconductors

Philips Semiconductors
7.16.3
Each colour of each pixel is handled separately. In double
pixel mode there are 6 bytes (red, green and blue of pixel 0
and pixel 1 from which pixel 0 arrives first). In single pixel
mode there are 3 bytes (red, green and blue of pixel 0).
Each of the six output ports (see Fig.27) can be connected
to each colour and can be inverted, swapped and aligned
to the MSB (sensible to drive 6-bit panels).
Table 53 Data to output mapping; note 1
Note
1. X = don’t care.
2004 Apr 01
handbook, full pagewidth
MSB_align
swap
inv
port_x_conf[2:0] allocation
XGA analog input flat panel controller
BIT
D
48 bits
ATA TO OUTPUT MAPPING
GENERATION,
GENERATION,
TRANSITION
MINIMIZING
alignment
swapping
inversion
BORDER
BLANK
FUNCTION
R0
G0
B0
R1
G1
B1
8 bits
each
Fig.27 Data to output mapping schema.
If this bit is set to logic 1, then the lower 6 bits are aligned to MSB.
If this bit is set to logic 1, then swap [7:0] to [0:7]; LSB becomes MSB.
If this bit is set to logic 1, then bit wise inversion of the colour component.
Output port Px gets data byte with 6 bytes in double pixel mode or 3 bytes in
single pixel mode (for x = A to F):
11X: 0R
101: 0G
100: 0B
01X: 1R
001: 1G
000: 1B
76
Registers OI_B0R, OI_B0G, OI_B0B, OI_B1R, OI_B1G
and OI_B1B have to be programmed according to
Table 53.
ACTION
MSB
LSB
MHC234
SAA6703AH
Product specification
PA
PB
PC
PD
PE
PF