W83697HFFDC Information Storage Devices, Inc, W83697HFFDC Datasheet - Page 58

• Manufacturer Part Number: W83697HFFDC
• Description: LPC Interface I/o Plus Game/midi Port, Fan Control, Flash ROM I/f
• Manufacturer: Information Storage Devices, Inc

Bit 7: RFEI. In 16450 mode, this bit is always set to a logic 0. In 16550 mode, this bit is set to a logic 1
Bit 6: TSRE. In 16450 mode, when TBR and TSR are both empty, this bit will be set to a logical 1. In
Bit 5: TBRE. In 16450 mode, when a data character is transferred from TBR to TSR, this bit will be set to
Bit 4: SBD. This bit is set to a logical 1 to indicate that received data are kept in silent state for a full
Bit 3: NSER. This bit is set to a logical 1 to indicate that the received data have no stop bit. In 16550
Bit 2: PBER. This bit is set to a logical 1 to indicate that the parity bit of received data is wrong. In 16550
Bit 1: OER. This bit is set to a logical 1 to indicate received data have been overwritten by the next
Bit 0: RDR. This bit is set to a logical 1 to indicate received data are ready to be read by the CPU in the
when there is at least one parity bit error, no stop bit error or silent byte detected in the FIFO. In
16550 mode, this bit is cleared by reading from the USR if there are no remaining errors left in the
FIFO.
16550 mode, if the transmit FIFO and TSR are both empty, it will be set to a logical 1. Other
thanthese two cases, this bit will be reset to a logical 0.
a logical 1. If ETREI of ICR is a logical 1, an interrupt will be generated to notify the CPU to write
the next data. In 16550 mode, this bit will be set to a logical 1 when the transmit FIFO is empty. It
will be reset to a logical 0 when the CPU writes data into TBR or FIFO.
word time, including start bit, data bits, parity bit, and stop bits. In 16550 mode, it indicates the
same condition for the data on top of the FIFO. When the CPU reads USR, it will clear this bit to a
logical 0.
mode, it indicates the same condition for the data on top of the FIFO. When the CPU reads
USR, it will clear this bit to a logical 0.
mode, it indicates the same condition for the data on top of the FIFO. When the CPU reads USR,
it will clear this bit to a logical 0.
received data before they were read by the CPU. In 16550 mode, it indicates the same condition
instead of FIFO full. When the CPU reads USR, it will clear this bit to a logical 0.
RBR or FIFO. After no data are left in the RBR or FIFO, the bit will be reset to a lo gical 0.
- 49 -
Publication Release Date: Feb. 2002
W83697HF/F
Revision 0.70