w83795g Winbond Electronics Corp America, w83795g Datasheet - Page 39

• Manufacturer Part Number: w83795g
• Description: Nuvoton H/w Monitor
• Manufacturer: Winbond Electronics Corp America

8.3.1.2.
Clear to 0 will enable x8 input gain buffer for the corresponding voltage monitoring Channels. Set to 1
will enable x1 input gain buffer for the corresponding voltage monitoring channels.
Location: Bank 0 Address 08
Type:
Reset:
Default Value: 0F
BIT
BIT
7-4
1
0
3
2
1
0
Read / Write
Init Reset (CR01.Bit7) is set,
Voltage Monitoring Input Gain Buffer Control Register (VMIGB CTRL)
3VSB Rising.
3VDD Rising @ RST_VDD_MD (CR01.Bit5) set,
SYSRSTIN# Falling @ SYSRST_MD (CR01.Bit6) set.
pin.
0 = Disable FANIN11 monitoring. Then PECI_REQ#, PVID2 and GPIO3 can be selected
by VID_TAB and EN_VOLTFAULT.
1 = Enable FANIN11 monitoring.
PVID2 function is not for W83795ADG.
EN_FANIN10 – Select and enable FANIN10/PVID1/GPIO2 multi-function pin.
0 = Disable FANIN10 monitoring. Then PVID1 and GPIO2 can be selected by VID_TAB.
1 = Enable FANIN10 monitoring.
PVID1 function is not for W83795ADG.
EN_FANIN9 – Select and enable FANIN9/PVID0/GPIO1 multi-function pin.
0 = Disable FANIN9 monitoring. Then PVID0 and GPIO1 can be selected by VID_TAB.
1 = Enable FANIN9 monitoring.
PVID0 function is not for W83795ADG.
Reserved
GAIN_VDSEN17 – Enable VDSEN17 voltage monitoring input gain buffer.
0 = x8
1 = x1
GAIN_VDSEN16 – Enable VDSEN16 voltage monitoring input gain buffer.
0 = x8
1 = x1
GAIN_VDSEN15 – Enable VDSEN15 voltage monitoring input gain buffer.
0 = x8
1 = x1
GAIN_VDSEN14 – Enable VDSEN14 voltage monitoring input gain buffer.
0 = x8
1 = x1
HEX
HEX
- 39 –
DESCRIPTION
DESCRIPTION
W83795G/ADG
Revision 1.41
Aug/2/2010