w83795g Winbond Electronics Corp America, w83795g Datasheet - Page 68

• Manufacturer Part Number: w83795g
• Description: Nuvoton H/w Monitor
• Manufacturer: Winbond Electronics Corp America

8.9.1.2.
Location: Bank 0 Address 6B
Type:
Reset:
Default Value: 64
8.9.1.3.
Location: Bank 0 Address 6C
Type:
Reset:
Default Value: 64
BIT
2-0
BIT
7-0
BIT
7-0
Read / Write
Init Reset (CR01.Bit7) is set,
Read / Write
Init Reset (CR01.Bit7) is set,
Dynamic VID High Tolerance Register (DVID LIMHI)
3VSB Rising.
3VDD Rising @ RST_VDD_MD (CR01.Bit5) set,
SYSRSTIN# Falling @ SYSRST_MD (CR01.Bit6) set.
Dynamic VID Low Tolerance Register (DVID LIMLO)
3VSB Rising.
3VDD Rising @ RST_VDD_MD (CR01.Bit5) set,
SYSRSTIN# Falling @ SYSRST_MD (CR01.Bit6) set.
VID_SEL.
VID function enable and VID Table Select:
000
001
010
011
100
101
110
111
Dynamic VID High Tolerance.
register will force VSEN1, VSEN2 and VSEN3 Limit to update with new voltage limits for
VSEN1, VSEN2 and VSEN3.
Dynamic VID Low Tolerance.
register will force VSEN1, VSEN2 and VSEN3 Limit Generator to generate new voltage
limits for VSEN1, VSEN2 and VSEN3.
If the dynamic VID function (set Bank0 CR6A bit5-3 to 1) is enabled, writing Tolerance
The unit is 2mV
If the dynamic VID function (set Bank0 CR6A bit5-3 to 1) is enabled, writing Tolerance
The unit is 2mV
BIN
BIN
BIN
BIN
BIN
BIN
BIN
BIN
HEX
HEX
= Disable VID function and function of Pin 57~64 are not about VID. (Default)
= Enable VRM9 table and Pin 61~57 are VID[4:0].
= Enable VRM10 table and Pin 63~57 are VID[6:0].
= Enable VRM11 table and Pin 64~57 are VID[7:0].
= Enable AMD Opteron
= Enable AMD Opteron
= Enable AMD SVID table and Pin 63~64 are SCL_SVI and SDA_SVI.
= Disable VID function and function of Pin 57~64 are not about VID.
HEX
HEX
TM
TM
5 bit VID Codes and Pin 61~57 are VID[4:0].
6 bit VID Codes and Pin 62~57 are VID[5:0].
- 68 –
DESCRIPTION
DESCRIPTION
DESCRIPTION
W83795G/ADG
Revision 1.41
Aug/2/2010